← 返回 Skills 市场
151
总下载
0
收藏
0
当前安装
1
版本数
在 OpenClaw 中安装
/install rf-test-instruments
功能描述
提供射频测试仪器的使用指导。当用户询问频谱分析仪、网络分析仪、功率计等仪器的操作、测试方法、问题排查时调用。
安全使用建议
This skill is a static, instruction-only guide for RF test instruments and appears internally consistent and low-risk. Before relying on its advice, consider: follow instrument safety limits (input power, connector/cable ratings, and ESD precautions); confirm procedures against your instrument's manufacturer manual and calibration certificates; if you later add automation code or instrument-control scripts (SCPI over USB/LAN), inspect that code and any required credentials (IP addresses, passwords, API keys) before granting access. Because this skill is only documentation and asks for no secrets or installs, there is no evidence of covert/exfiltration behavior.
能力评估
Purpose & Capability
The skill name and description match the SKILL.md content: detailed procedures for VNAs, spectrum analyzers, power meters, and signal generators. It declares no binaries, env vars, or config paths — consistent with a documentation/instruction-only skill. Nothing in the package requests unrelated cloud credentials or system access.
Instruction Scope
The SKILL.md stays on-topic and provides technical measurement and calibration steps. It does not instruct the agent to read system files, access environment variables, call external endpoints, or collect/transmit unrelated data. The instructions are procedural (how to configure and measure) and limited to instrument operation and measurement best practices.
Install Mechanism
There is no install specification and no code files; this is instruction-only. No downloads or archives are specified, so nothing will be written to disk or executed as part of installation.
Credentials
The skill requires no environment variables, credentials, or config paths. The lack of requested secrets is proportional to a documentation-style RF instrument guide.
Persistence & Privilege
always is false and the skill does not request persistent privileges or modify other skills. Autonomous invocation is allowed (platform default) but poses no added risk given the skill is instruction-only and requests no credentials.
如何使用
- 确保已安装 OpenClaw（本地或 Docker 部署）
- 在对话框中输入安装命令：
/install rf-test-instruments - 安装完成后，直接呼叫该 Skill 的名称或使用
/rf-test-instruments触发 - 根据 Skill 的参数说明提供必要输入，即可获得结构化输出
版本历史
v1.0.0
Initial release of the "rf-test-instruments" skill.
- 提供射频测试仪器（频谱分析仪、网络分析仪、功率计等）的使用指导。
- 覆盖仪器功能、常见型号、校准流程、典型测量方法、误差分析与安全须知。
- 包含先进测量场景和注意事项，适合日常操作与故障排查。
- 适用于射频工程师及相关测试人员。
元数据
常见问题
射频测试仪器使用 是什么？
提供射频测试仪器的使用指导。当用户询问频谱分析仪、网络分析仪、功率计等仪器的操作、测试方法、问题排查时调用。 它是一个面向 Claude Code / OpenClaw 的 AI Agent Skill 插件，目前累计下载 151 次。
如何安装 射频测试仪器使用？
在 OpenClaw 或 Claude Code 对话框中运行命令「/install rf-test-instruments」即可一键安装，无需额外配置。
射频测试仪器使用 是免费的吗？
是的，射频测试仪器使用 完全免费，采用 MIT-0 许可证，可自由下载、安装和使用。
射频测试仪器使用 支持哪些平台？
射频测试仪器使用 跨平台运行，可在任意部署了 OpenClaw / Claude Code 的环境中使用（cross-platform）。
谁开发了 射频测试仪器使用？
由 mssnzxm（@mssnzxm）开发并维护，当前版本 v1.0.0。
推荐 Skills