← 返回 Skills 市场
127
总下载
0
收藏
0
当前安装
1
版本数
在 OpenClaw 中安装
/install rf-engineering
功能描述
专注于射频电路设计、无线传播衰落模型、阻抗匹配、射频组件原理与仿真、PCB射频布局及相关测试测量与法规认证技术。
安全使用建议
This skill is a read-only RF engineering reference and appears internally consistent and low-risk: it asks for no credentials, has no install steps, and doesn't instruct the agent to access files or endpoints. Before installing: (1) note the skill source is unknown—if provenance matters to you, prefer skills with a known homepage or author; (2) if you allow autonomous invocation, remember the agent could quote or use this technical content when acting autonomously (that is normal); (3) if you intend the agent to run simulations or tools referenced in the doc (MATLAB, Keysight, Remcom, etc.), those tools must be installed separately and you should review any skill updates or future versions for added permissions. If you want extra caution, only enable the skill when you explicitly need RF guidance and monitor agent actions/logs.
功能分析
Type: OpenClaw Skill
Name: rf-engineering
Version: 1.0.0
The skill bundle is a comprehensive technical reference for Radio Frequency (RF) engineering, covering electromagnetic propagation, circuit design, PCB layout, and regulatory standards. It contains no executable code, scripts, or instructions that could be used for prompt injection or malicious activities, and serves purely as an informational resource.
能力评估
Purpose & Capability
The skill name/description (RF Engineering) aligns with the SKILL.md content: theory, models, design methods, tools and standards for RF design and testing. It does not request unrelated binaries, credentials, or config paths.
Instruction Scope
SKILL.md is a technical reference and does not instruct the agent to read local files, access environment variables, call external endpoints, or run commands. It lists third‑party tools as references but gives no procedural steps that would require extra privileges.
Install Mechanism
There is no install spec and no code files. Because the skill is instruction-only, nothing is downloaded or written to disk by an installer.
Credentials
The skill declares no required environment variables, credentials, or config paths. No secrets or unrelated service tokens are requested, which is proportionate for a documentation/reference skill.
Persistence & Privilege
always is false and the skill is user-invocable. disable-model-invocation is false (agent could invoke it autonomously), which is the platform default; given there are no creds or install steps this does not raise additional concern.
如何使用
- 确保已安装 OpenClaw（本地或 Docker 部署）
- 在对话框中输入安装命令：
/install rf-engineering - 安装完成后，直接呼叫该 Skill 的名称或使用
/rf-engineering触发 - 根据 Skill 的参数说明提供必要输入，即可获得结构化输出
版本历史
v1.0.0
Initial release: propagation, RF circuits, Smith chart, PCB design, EMC, certifications
元数据
常见问题
RF Engineering 是什么？
专注于射频电路设计、无线传播衰落模型、阻抗匹配、射频组件原理与仿真、PCB射频布局及相关测试测量与法规认证技术。 它是一个面向 Claude Code / OpenClaw 的 AI Agent Skill 插件，目前累计下载 127 次。
如何安装 RF Engineering？
在 OpenClaw 或 Claude Code 对话框中运行命令「/install rf-engineering」即可一键安装，无需额外配置。
RF Engineering 是免费的吗？
是的，RF Engineering 完全免费，采用 MIT-0 许可证，可自由下载、安装和使用。
RF Engineering 支持哪些平台？
RF Engineering 跨平台运行，可在任意部署了 OpenClaw / Claude Code 的环境中使用（cross-platform）。
谁开发了 RF Engineering？
由 ViewWay（@viewway）开发并维护，当前版本 v1.0.0。
推荐 Skills