← 返回 Skills 市场
elontools

OpenClaw ElonTools Optimizer v3 — Safe Edition

作者 elontools · GitHub ↗ · v3.0.0 · MIT-0
cross-platform ⚠ suspicious
137
总下载
0
收藏
0
当前安装
1
版本数
在 OpenClaw 中安装
/install openclaw-elontools-optimizer-v3
功能描述
Otimizações SEGURAS para OpenClaw — apenas configurações que economizam tokens sem NENHUM risco de perda de contexto ou loops infinitos. QUANDO USAR: - Setup...
安全使用建议
This skill is mostly coherent with its stated goal (safe OpenClaw config tweaks) but has two red flags you must address before running it: (1) a contradiction — the doc repeatedly warns 'NEVER' to touch contextPruning/compaction/etc., yet it shows an example factory-defaults config.patch that changes contextPruning and compaction; do NOT run that patch until you understand why it's needed and have a backup; (2) a pre-scan 'system-prompt-override' pattern was detected in SKILL.md, which increases the risk if configuration patches are altered. Practical next steps: - Inspect your current gateway configuration with gateway(action="config.get") and export/save a full backup before applying anything. - Manually review the exact JSON you will send to gateway(action="config.patch"). The included preset (references/preset-safe.json) is visible and disables many plugins and sets heartbeat.model to "elon/claude-haiku-4-5" — confirm you want those changes and that you have access to that model. - Do not blindly run the 'factory defaults' snippet; ask the skill author to explain why that patch changes contextPruning despite the 'never change' rule, or test in a staging environment first. - If you rely on any of the listed plugins (WhatsApp, Discord, Slack, etc.), do not apply the plugin-disable section or edit it to preserve those entries. - Prefer applying changes incrementally and verifying agent behavior (heartbeats, session pruning) rather than a single global patch. If you want higher assurance, request the skill author to remove or explain the factory-defaults snippet, remove the contradictory guidance, and provide a clear, single atomic patch that does not touch contextPruning/compaction/bootstrap settings.
功能分析
Type: OpenClaw Skill Name: openclaw-elontools-optimizer-v3 Version: 3.0.0 The skill bundle provides legitimate configuration optimizations for the OpenClaw platform, focusing on token cost reduction and session maintenance. It uses the platform's native 'gateway' API to update settings in 'references/preset-safe.json', such as disabling unused messaging plugins and switching heartbeat models to a more economical version. No indicators of data exfiltration, malicious execution, or prompt injection were found.
能力评估
Purpose & Capability
Name/description match the instructions: the skill is an instruction-only preset that patches OpenClaw gateway configuration to use a cheaper heartbeat model, auto-archive sub-agents, prune sessions, and disable listed plugins. Those capabilities are consistent with a configuration-optimizer skill. One mismatch: the README strongly warns never to change contextPruning/compaction/etc., yet the example 'factory defaults' config.patch shown earlier modifies contextPruning/compaction — this contradiction needs clarification.
Instruction Scope
Runtime instructions instruct the agent to read the included preset JSON and run gateway(action="config.patch", raw=...) and gateway(action="config.get"). That is expected for applying system-wide config changes, but: (1) the SKILL.md contains an explicit 'factory defaults' config.patch that modifies contextPruning and compaction (contradicting the 'DO NOT touch contextPruning' advice), and (2) the static scan flagged a 'system-prompt-override' pattern in the SKILL.md. While no explicit system prompt field is present in the provided JSON, the presence of gateway config patching plus the injection-like wording increases risk if the patch content is altered or misapplied. The skill does not instruct reading other files or environment variables beyond its own preset.
Install Mechanism
Instruction-only skill with no install spec and no code files; nothing is written to disk by an installer. Lowest-risk install mechanism.
Credentials
No required environment variables, credentials, or config paths are declared. The changes are limited to gateway configuration calls described in the SKILL.md and the included preset JSON. That is proportionate to a config optimizer.
Persistence & Privilege
The skill does not request always:true and is user-invocable. However, it explicitly instructs performing gateway config patches that modify agent-wide defaults (heartbeat model, plugins, session maintenance). Those are system-level changes and should be treated as privileged operations — the user must ensure they have backups and proper authorization before applying. Autonomous invocation was not disallowed; combined with gateway patching this increases blast radius if misused.
如何使用
  1. 确保已安装 OpenClaw(本地或 Docker 部署)
  2. 在对话框中输入安装命令:/install openclaw-elontools-optimizer-v3
  3. 安装完成后,直接呼叫该 Skill 的名称或使用 /openclaw-elontools-optimizer-v3 触发
  4. 根据 Skill 的参数说明提供必要输入,即可获得结构化输出
版本历史
v3.0.0
v3: APENAS otimizações seguras. Removido contextPruning/compaction/bootstrapMaxChars que causava loops infinitos.
元数据
Slug openclaw-elontools-optimizer-v3
版本 3.0.0
许可证 MIT-0
累计安装 0
当前安装数 0
历史版本数 1
常见问题

OpenClaw ElonTools Optimizer v3 — Safe Edition 是什么?

Otimizações SEGURAS para OpenClaw — apenas configurações que economizam tokens sem NENHUM risco de perda de contexto ou loops infinitos. QUANDO USAR: - Setup... 它是一个面向 Claude Code / OpenClaw 的 AI Agent Skill 插件,目前累计下载 137 次。

如何安装 OpenClaw ElonTools Optimizer v3 — Safe Edition?

在 OpenClaw 或 Claude Code 对话框中运行命令「/install openclaw-elontools-optimizer-v3」即可一键安装,无需额外配置。

OpenClaw ElonTools Optimizer v3 — Safe Edition 是免费的吗?

是的,OpenClaw ElonTools Optimizer v3 — Safe Edition 完全免费,采用 MIT-0 许可证,可自由下载、安装和使用。

OpenClaw ElonTools Optimizer v3 — Safe Edition 支持哪些平台?

OpenClaw ElonTools Optimizer v3 — Safe Edition 跨平台运行,可在任意部署了 OpenClaw / Claude Code 的环境中使用(cross-platform)。

谁开发了 OpenClaw ElonTools Optimizer v3 — Safe Edition?

由 elontools(@elontools)开发并维护,当前版本 v3.0.0。

💬 留言讨论