← 返回 Skills 市场
Node Connect
作者
ciklopentan
· GitHub ↗
· v1.0.2
· MIT-0
177
总下载
0
收藏
0
当前安装
3
版本数
在 OpenClaw 中安装
/install node-connect-smith
功能描述
Diagnose OpenClaw node connection and pairing failures for Android, iOS, and macOS companion apps. Use when manual connect fails, local Wi-Fi works but VPS/t...
安全使用建议
This SKILL.md appears to do what it says: targeted diagnostic commands for OpenClaw pairing and connectivity. Before using it, ensure the host actually has the 'openclaw' CLI (and 'tailscale' if you use Tailscale) installed, since the skill’s metadata doesn’t declare required binaries. Be prepared that the instructions may prompt you to run state-changing commands (for example, approving device pair requests). Only approve pairing requests you recognize. If you want stricter guarantees, ask the maintainer to update the skill metadata to list required binaries and to explicitly document any potentially destructive or state-changing commands.
功能分析
Type: OpenClaw Skill
Name: node-connect-smith
Version: 1.0.2
The skill bundle provides a diagnostic workflow for OpenClaw connectivity that includes high-risk administrative actions such as approving device pairing requests, authorizing nodes, and rotating device tokens (SKILL.md). While these capabilities (e.g., 'openclaw devices approve', 'openclaw nodes approve', and 'openclaw devices rotate') are plausibly necessary for the stated purpose of fixing connection failures, they represent a significant security risk as they allow an AI agent to modify access control and security principals. The instructions also involve gathering network configuration data via 'tailscale status' and 'openclaw config get'.
能力评估
Purpose & Capability
The skill is clearly focused on OpenClaw connection and pairing troubleshooting and the steps and commands align with that purpose. However, the metadata declares no required binaries while the instructions call out the 'openclaw' CLI and, in some flows, the 'tailscale' CLI — these should be declared as required binaries to be internally consistent.
Instruction Scope
The SKILL.md stays on-task: it asks topology questions, reads a limited set of configuration keys, runs targeted CLI checks, and only performs pairing/approval actions after confirming the route. It explicitly warns against speculative commands and unnecessary dumps of config. The only noteworthy point is that it contains commands that change state (e.g., openclaw devices approve <requestId>), so the operator must consent.
Install Mechanism
There is no install spec (instruction-only skill), so nothing is downloaded or written to disk by the skill itself. This minimizes code-install risk.
Credentials
The skill requests no environment variables or credentials. It does assume access to local CLIs and to the OpenClaw host environment, which is appropriate for on-host troubleshooting.
Persistence & Privilege
The skill is not force-installed (always: false) and does not request to modify other skills or system-wide settings. It does include commands that grant pairing/approval; those are normal for the troubleshooting task but are privileged actions that require user confirmation.
如何使用
- 确保已安装 OpenClaw（本地或 Docker 部署）
- 在对话框中输入安装命令：
/install node-connect-smith - 安装完成后，直接呼叫该 Skill 的名称或使用
/node-connect-smith触发 - 根据 Skill 的参数说明提供必要输入，即可获得结构化输出
版本历史
v1.0.2
Remove all QR references; switch route discovery to config-driven checks; keep pairing/auth troubleshooting intact.
v1.0.1
10-round dual-thinking hardening: phased route/auth flow, manual override gate, same-machine short-circuit, targeted config reads, Tailscale Serve/Funnel clarifications, token/version-skew handling.
v1.0.0
Hardened via 6-round alternating dual-thinking review with deterministic topology gate, route map, and bounded diagnosis flow.
元数据
常见问题
Node Connect 是什么？
Diagnose OpenClaw node connection and pairing failures for Android, iOS, and macOS companion apps. Use when manual connect fails, local Wi-Fi works but VPS/t... 它是一个面向 Claude Code / OpenClaw 的 AI Agent Skill 插件，目前累计下载 177 次。
如何安装 Node Connect？
在 OpenClaw 或 Claude Code 对话框中运行命令「/install node-connect-smith」即可一键安装，无需额外配置。
Node Connect 是免费的吗？
是的，Node Connect 完全免费，采用 MIT-0 许可证，可自由下载、安装和使用。
Node Connect 支持哪些平台？
Node Connect 跨平台运行，可在任意部署了 OpenClaw / Claude Code 的环境中使用（cross-platform）。
谁开发了 Node Connect？
由 ciklopentan（@ciklopentan）开发并维护，当前版本 v1.0.2。
推荐 Skills