功能描述

Amazon Appflow API skill. Use when working with Amazon Appflow for cancel-flow-executions, create-connector-profile, create-flow. Covers 25 endpoints.

使用说明 (SKILL.md)

Amazon Appflow

Name: Lap Amazon Appflow
Author: mickmicksh

API version: 2020-08-23

Auth

AWS SigV4

Base URL

Not specified.

Setup

Configure auth: AWS SigV4
GET /tags/{resourceArn} -- verify access
POST /cancel-flow-executions -- create first cancel-flow-executions

Endpoints

25 endpoints across 23 groups. See references/api-spec.lap for full details.

cancel-flow-executions

Method	Path	Description
POST	/cancel-flow-executions	Cancels active runs for a flow. You can cancel all of the active runs for a flow, or you can cancel specific runs by providing their IDs. You can cancel a flow run only when the run is in progress. You can't cancel a run that has already completed or failed. You also can't cancel a run that's scheduled to occur but hasn't started yet. To prevent a scheduled run, you can deactivate the flow with the StopFlow action. You cannot resume a run after you cancel it. When you send your request, the status for each run becomes CancelStarted. When the cancellation completes, the status becomes Canceled. When you cancel a run, you still incur charges for any data that the run already processed before the cancellation. If the run had already written some data to the flow destination, then that data remains in the destination. If you configured the flow to use a batch API (such as the Salesforce Bulk API 2.0), then the run will finish reading or writing its entire batch of data after the cancellation. For these operations, the data processing charges for Amazon AppFlow apply. For the pricing information, see Amazon AppFlow pricing.

create-connector-profile

Method	Path	Description
POST	/create-connector-profile	Creates a new connector profile associated with your Amazon Web Services account. There is a soft quota of 100 connector profiles per Amazon Web Services account. If you need more connector profiles than this quota allows, you can submit a request to the Amazon AppFlow team through the Amazon AppFlow support channel. In each connector profile that you create, you can provide the credentials and properties for only one connector.

create-flow

Method	Path	Description
POST	/create-flow	Enables your application to create a new flow using Amazon AppFlow. You must create a connector profile before calling this API. Please note that the Request Syntax below shows syntax for multiple destinations, however, you can only transfer data to one item in this list at a time. Amazon AppFlow does not currently support flows to multiple destinations at once.

delete-connector-profile

Method	Path	Description
POST	/delete-connector-profile	Enables you to delete an existing connector profile.

delete-flow

Method	Path	Description
POST	/delete-flow	Enables your application to delete an existing flow. Before deleting the flow, Amazon AppFlow validates the request by checking the flow configuration and status. You can delete flows one at a time.

describe-connector

Method	Path	Description
POST	/describe-connector	Describes the given custom connector registered in your Amazon Web Services account. This API can be used for custom connectors that are registered in your account and also for Amazon authored connectors.

describe-connector-entity

Method	Path	Description
POST	/describe-connector-entity	Provides details regarding the entity used with the connector, with a description of the data model for each field in that entity.

describe-connector-profiles

Method	Path	Description
POST	/describe-connector-profiles	Returns a list of connector-profile details matching the provided connector-profile names and connector-types. Both input lists are optional, and you can use them to filter the result. If no names or connector-types are provided, returns all connector profiles in a paginated form. If there is no match, this operation returns an empty list.

describe-connectors

Method	Path	Description
POST	/describe-connectors	Describes the connectors vended by Amazon AppFlow for specified connector types. If you don't specify a connector type, this operation describes all connectors vended by Amazon AppFlow. If there are more connectors than can be returned in one page, the response contains a nextToken object, which can be be passed in to the next call to the DescribeConnectors API operation to retrieve the next page.

describe-flow

Method	Path	Description
POST	/describe-flow	Provides a description of the specified flow.

describe-flow-execution-records

Method	Path	Description
POST	/describe-flow-execution-records	Fetches the execution history of the flow.

list-connector-entities

Method	Path	Description
POST	/list-connector-entities	Returns the list of available connector entities supported by Amazon AppFlow. For example, you can query Salesforce for Account and Opportunity entities, or query ServiceNow for the Incident entity.

list-connectors

Method	Path	Description
POST	/list-connectors	Returns the list of all registered custom connectors in your Amazon Web Services account. This API lists only custom connectors registered in this account, not the Amazon Web Services authored connectors.

list-flows

Method	Path	Description
POST	/list-flows	Lists all of the flows associated with your account.

Method	Path	Description
GET	/tags/{resourceArn}	Retrieves the tags that are associated with a specified flow.
POST	/tags/{resourceArn}	Applies a tag to the specified flow.
DELETE	/tags/{resourceArn}	Removes a tag from the specified flow.

register-connector

Method	Path	Description
POST	/register-connector	Registers a new custom connector with your Amazon Web Services account. Before you can register the connector, you must deploy the associated AWS lambda function in your account.

reset-connector-metadata-cache

Method	Path	Description
POST	/reset-connector-metadata-cache	Resets metadata about your connector entities that Amazon AppFlow stored in its cache. Use this action when you want Amazon AppFlow to return the latest information about the data that you have in a source application. Amazon AppFlow returns metadata about your entities when you use the ListConnectorEntities or DescribeConnectorEntities actions. Following these actions, Amazon AppFlow caches the metadata to reduce the number of API requests that it must send to the source application. Amazon AppFlow automatically resets the cache once every hour, but you can use this action when you want to get the latest metadata right away.

start-flow

Method	Path	Description
POST	/start-flow	Activates an existing flow. For on-demand flows, this operation runs the flow immediately. For schedule and event-triggered flows, this operation activates the flow.

stop-flow

Method	Path	Description
POST	/stop-flow	Deactivates the existing flow. For on-demand flows, this operation returns an unsupportedOperationException error message. For schedule and event-triggered flows, this operation deactivates the flow.

unregister-connector

Method	Path	Description
POST	/unregister-connector	Unregisters the custom connector registered in your account that matches the connector label provided in the request.

update-connector-profile

Method	Path	Description
POST	/update-connector-profile	Updates a given connector profile associated with your account.

update-connector-registration

Method	Path	Description
POST	/update-connector-registration	Updates a custom connector that you've previously registered. This operation updates the connector with one of the following: The latest version of the AWS Lambda function that's assigned to the connector A new AWS Lambda function that you specify

update-flow

Method	Path	Description
POST	/update-flow	Updates an existing flow.

Common Questions

Match user requests to endpoints in references/api-spec.lap. Key patterns:

"Create a cancel-flow-execution?" -> POST /cancel-flow-executions
"Create a create-connector-profile?" -> POST /create-connector-profile
"Create a create-flow?" -> POST /create-flow
"Create a delete-connector-profile?" -> POST /delete-connector-profile
"Create a delete-flow?" -> POST /delete-flow
"Create a describe-connector?" -> POST /describe-connector
"Create a describe-connector-entity?" -> POST /describe-connector-entity
"Create a describe-connector-profile?" -> POST /describe-connector-profiles
"Create a describe-connector?" -> POST /describe-connectors
"Create a describe-flow?" -> POST /describe-flow
"Create a describe-flow-execution-record?" -> POST /describe-flow-execution-records
"Create a list-connector-entity?" -> POST /list-connector-entities
"Create a list-connector?" -> POST /list-connectors
"Create a list-flow?" -> POST /list-flows
"Get tag details?" -> GET /tags/{resourceArn}
"Create a register-connector?" -> POST /register-connector
"Create a reset-connector-metadata-cache?" -> POST /reset-connector-metadata-cache
"Create a start-flow?" -> POST /start-flow
"Create a stop-flow?" -> POST /stop-flow
"Create a unregister-connector?" -> POST /unregister-connector
"Delete a tag?" -> DELETE /tags/{resourceArn}
"Create a update-connector-profile?" -> POST /update-connector-profile
"Create a update-connector-registration?" -> POST /update-connector-registration
"Create a update-flow?" -> POST /update-flow
"How to authenticate?" -> See Auth section

Response Tips

Check response schemas in references/api-spec.lap for field details
Create/update endpoints typically return the created/updated object

CLI

# Update this spec to the latest version
npx @lap-platform/lapsh get amazon-appflow -o references/api-spec.lap

# Search for related APIs
npx @lap-platform/lapsh search amazon-appflow

References

Full spec: See references/api-spec.lap for complete endpoint details, parameter tables, and response schemas

Generated from the official API spec by LAP

安全使用建议

Install only if you intend to let the agent manage Amazon AppFlow. Use a least-privilege AWS/IAM credential, avoid broad account keys, and require explicit confirmation before any create, delete, or cancel operation. Do not treat the /cancel-flow-executions setup step as a harmless access test.

功能分析

Type: OpenClaw Skill Name: lap-amazon-appflow Version: 1.0.0 The skill bundle is a standard API wrapper for Amazon Appflow, generated by the LAP platform. It defines 25 legitimate AWS endpoints (e.g., create-flow, list-connectors) and requires standard AWS SigV4 authentication via an environment variable. No evidence of malicious intent, data exfiltration, or prompt injection was found in SKILL.md or _meta.json.

能力标签

requires-sensitive-credentials

能力评估

⚠ Purpose & Capability

The Amazon AppFlow API purpose is coherent, but the documented capabilities include high-impact mutations such as creating and deleting flows and connector profiles, and cancelling active flow executions.

⚠ Instruction Scope

The setup section includes a POST to /cancel-flow-executions as an initial setup action, without clear user confirmation or scoping, even though cancellation can be irreversible for in-progress runs.

ℹ Install Mechanism

There is no install code to run, but the SKILL.md references a missing api-spec.lap file for full details, leaving part of the API contract unavailable in the provided artifacts.

⚠ Credentials

The skill requires sensitive AppFlow/AWS-style credentials and can mutate AWS AppFlow resources, but the artifacts do not provide least-privilege IAM scope guidance or approval boundaries.

ℹ Persistence & Privilege

No background persistence or local code is shown; the main privilege risk comes from the cloud account authority granted through the required credential.

版本历史

v1.0.0

Initial release of lap-amazon-appflow skill. - Provides access to 25 Amazon AppFlow API endpoints, including flow management and connector profile operations. - Supports actions like creating, listing, describing, starting, stopping, and deleting flows and connector profiles. - AWS SigV4 authentication required (AMAZON_APPFLOW_API_KEY). - Includes tagging operations for flows. - Setup instructions included for authentication and sample endpoint calls.

元数据

Slug lap-amazon-appflow

版本 1.0.0

许可证 MIT-0

累计安装 0

当前安装数 0

历史版本数 1

常见问题

Lap Amazon Appflow 是什么？

Amazon Appflow API skill. Use when working with Amazon Appflow for cancel-flow-executions, create-connector-profile, create-flow. Covers 25 endpoints. 它是一个面向 Claude Code / OpenClaw 的 AI Agent Skill 插件，目前累计下载 48 次。

如何安装 Lap Amazon Appflow？

在 OpenClaw 或 Claude Code 对话框中运行命令「/install lap-amazon-appflow」即可一键安装，无需额外配置。

Lap Amazon Appflow 是免费的吗？

是的，Lap Amazon Appflow 完全免费，采用 MIT-0 许可证，可自由下载、安装和使用。

Lap Amazon Appflow 支持哪些平台？

Lap Amazon Appflow 跨平台运行，可在任意部署了 OpenClaw / Claude Code 的环境中使用（cross-platform）。

谁开发了 Lap Amazon Appflow？

由 mickmicksh（@mickmicksh）开发并维护，当前版本 v1.0.0。

Lap Amazon Appflow