wlcom GUI Automation

Use this skill when automating GUI tests on KylinOS V11 Desktop（银河麒麟桌面操作系统 V11）using wlcom's wlcctrl command.

Ground rules

• V11 uses Wayland + UKUI + wayland-compositor/wlcom; do not assume X11 tools are authoritative.
• Prefer wlcctrl for window discovery, screenshots, pointer movement, clicks, keys, and window placement.
• Always inspect scale before calculating pointer coordinates.
• wlcctrl --mousemove is absolute, despite the man page saying displacement.
• On tested V11 machines, --mousemove input must be logical coordinate × output scale; --getmouselocation returns logical coordinates.
• --windowmove -x/-y uses logical coordinates; do not multiply by scale.
• Current wlcctrl v1.0.0 help/man shows screenshot support, but no recording subcommand. If recording is required, check for other wlcom tools or use an approved recorder.

Quick workflow

# 1. Confirm tool and version
command -v wlcctrl
wlcctrl --version

# 2. Inspect output UUID and scale
wlcctrl --outputs
wlcctrl --getdisplaygeometry \x3Coutput_uuid>
gsettings get org.ukui.SettingsDaemon.plugins.xsettings scaling-factor 2>/dev/null || true

# 3. Find target window
wlcctrl --list
wlcctrl --search '\x3Capp_id_or_title_regex>'
wlcctrl --getactivewindow
wlcctrl --getwindowgeometry \x3Cw_uuid>

# 4. Capture for visual coordinate identification
wlcctrl --windowcapture \x3Cw_uuid> --path /tmp/window.png

# 5. Move and click by scaled pointer coordinates
# logical_screen_x = window_x + screenshot_relative_x
# logical_screen_y = window_y + screenshot_relative_y
# mousemove_x = round(logical_screen_x * scale)
# mousemove_y = round(logical_screen_y * scale)
wlcctrl --mousemove \x3Cmousemove_x>,\x3Cmousemove_y>
wlcctrl --getmouselocation
wlcctrl --mousebutton 1

# 6. Verify by screenshot or pixel/window state
wlcctrl --windowcapture \x3Cw_uuid> --path /tmp/after.png

Helper scripts

The skill includes scripts under scripts/:

• scripts/wlcctrl-info.sh — print version, outputs, display geometry, scale candidates, active window, and mouse location.
• scripts/wlcctrl-window-click.sh \x3Cwindow_uuid> \x3Crelative_x> \x3Crelative_y> [button] — click a point relative to a window screenshot. It reads window geometry and output scale, converts to scaled --mousemove input, verifies location, then clicks.
• scripts/wlcctrl-move-window.sh \x3Cwindow_uuid> \x3Cx> \x3Cy> — move a window using logical coordinates and verify geometry.

Resolve script paths relative to this SKILL.md directory before running.

Common commands

Outputs and scale

wlcctrl --outputs
wlcctrl --getdisplaygeometry \x3Coutput_uuid>

Look for:

physical size: 300x190 mm
scale: 1.750000
mode: 2880 x 1800 @ 90
position: 0, 0

xdpyinfo may report Xwayland logical DPI (for example 96x96) and should not be used alone for Wayland coordinate conversion.

Windows

wlcctrl --list
wlcctrl --search '\x3Cregex>'
wlcctrl --getactivewindow
wlcctrl --getwindowname \x3Cw_uuid>
wlcctrl --getwindowgeometry \x3Cw_uuid>
wlcctrl --windowactivate \x3Cw_uuid>
wlcctrl --windowmove \x3Cw_uuid> -x 0 -y 0
wlcctrl --windowsize \x3Cw_uuid> -w 800 -h 600

Screenshots

wlcctrl --windowcapture \x3Cw_uuid> --path /tmp/window.png
wlcctrl --fullscreencapture --path /tmp/full.png
wlcctrl --setarea \x3Cx,y,width,height> --path /tmp/area.png
wlcctrl --workspacecapture \x3Cworkspace_uuid:output_uuid> --path /tmp/workspace.png

Keyboard and pointer

wlcctrl --key ctrl+alt+t
wlcctrl --keystring 'text to type'
wlcctrl --mousebutton 1
wlcctrl --mousepress 1 --mouserelease 1
wlcctrl --scroll -y 10
wlcctrl --getmouselocation

For drag actions, move to start, press, move to end, release. Remember --mousemove coordinates are scaled absolute coordinates.

Coordinate recipe

Given:

• output scale = S
• window geometry = (WX, WY) WIDTH x HEIGHT
• target point in captured window image = (RX, RY)

Then:

logical_x = WX + RX
logical_y = WY + RY
mousemove_x = round(logical_x * S)
mousemove_y = round(logical_y * S)

Run:

wlcctrl --mousemove "${mousemove_x},${mousemove_y}"
wlcctrl --getmouselocation   # should be near logical_x,logical_y
wlcctrl --mousebutton 1

Known tested example on one V11 machine:

• output eDP-1, scale 1.75
• calculator window geometry: (607, 176) 432 x 628
• = center in window screenshot (376,593)
• logical target (983,769)
• --mousemove input about (1720,1346)
• --getmouselocation returns about (983,769)

Test pattern

For a reliable GUI automation test:

1. Normalize the window: activate and optionally move to (0,0).
2. Capture the window.
3. Identify target controls from screenshot coordinates.
4. Click via scaled absolute --mousemove + --mousebutton.
5. Capture again and verify visually or with OCR/image analysis.
6. Log every wlcctrl command and its output for reproducibility.

Safety

• Avoid --windowclose and --windowkill unless the user explicitly asks.
• Before sending destructive keystrokes, confirm target window UUID/title.
• Store test screenshots/logs under a project artifacts/ directory when possible.