← Back to Skills Marketplace
Rdk X5 System
by
qiaolongli
· GitHub ↗
· v1.0.0
· MIT-0
255
Downloads
0
Stars
1
Active Installs
1
Versions
Install in OpenClaw
/install rdk-x5-system
Description
修改和管理 RDK X5 系统配置：查看系统版本/硬件信息/系统日志、rdk-backup 一键备份与恢复、apt OTA 升级、miniboot 固件更新、CPU/BPU 频率调节与温度阈值设置、config.txt 配置修改、实时内核切换、systemd 开机自启动、存储扩容。Use when the use...
Usage Guidance
This skill is coherent for RDK X5 system management, but it contains high-impact operations (firmware updates, partition resizing, editing boot config, running sudo). Only use it if you trust the skill source and you have physical access or recovery media in case of failure. Prefer running the documented commands manually yourself (or requiring explicit user confirmation) rather than allowing autonomous execution. Verify the presence and expected behavior of binaries like rdk-backup and rdk-miniboot-update on a test device, and ensure you have backups before performing OTA or miniboot updates.
Capability Analysis
Type: OpenClaw Skill
Name: rdk-x5-system
Version: 1.0.0
The skill bundle provides legitimate system administration instructions and commands for the RDK X5 development board. It covers standard tasks such as system monitoring, firmware updates via 'rdk-miniboot-update', backup procedures, and service management using systemd. All commands in SKILL.md are transparent, well-documented, and align with the stated purpose of system configuration without any evidence of malicious intent or data exfiltration.
Capability Assessment
Purpose & Capability
The name/description describe RDK X5 system management and the SKILL.md only references system-management binaries, files, and commands (apt, rdk-backup, rdk-miniboot-update, /boot/config.txt, /sys, systemd, resize2fs). The required binaries (apt, rdk-backup) are appropriate for the stated tasks.
Instruction Scope
Instructions stay within system-management scope (viewing hardware, backups, OTA upgrades, firmware update, CPU governor toggles, kernel switching, systemd services, resizing storage). However the steps include privileged, destructive actions (firmware miniboot update, partition growth/resizing, editing boot config) that can brick devices or require physical recovery; the SKILL.md legitimately needs these commands but they are high-impact and require user caution.
Install Mechanism
No install spec or bundled code — instruction-only skill; nothing is written to disk by the skill itself. This is the lowest risk install mechanism.
Credentials
No environment variables, credentials, or config paths are requested. The SKILL.md does access system files and device paths that are appropriate for system administration (e.g., /sys, /proc, /boot).
Persistence & Privilege
always:false and default autonomous invocation are set. The skill does not request permanent platform-wide privilege nor modify other skills' configs. Note that allowing autonomous invocation could let an agent execute high-privilege commands without interactive user confirmation.
How to Use
- Make sure OpenClaw is installed (local or Docker)
- Run the install command in chat:
/install rdk-x5-system - After installation, invoke the skill by name or use
/rdk-x5-system - Provide required inputs per the skill's parameter spec and get structured output
Version History
v1.0.0
Initial release: system management, backup, upgrade, autostart, storage
Metadata
Frequently Asked Questions
What is Rdk X5 System?
修改和管理 RDK X5 系统配置：查看系统版本/硬件信息/系统日志、rdk-backup 一键备份与恢复、apt OTA 升级、miniboot 固件更新、CPU/BPU 频率调节与温度阈值设置、config.txt 配置修改、实时内核切换、systemd 开机自启动、存储扩容。Use when the use... It is an AI Agent Skill for Claude Code / OpenClaw, with 255 downloads so far.
How do I install Rdk X5 System?
Run "/install rdk-x5-system" in the OpenClaw or Claude Code chat to install it in one step — no extra setup required.
Is Rdk X5 System free?
Yes, Rdk X5 System is completely free, licensed under MIT-0. You can download, install and use it at no cost.
Which platforms does Rdk X5 System support?
Rdk X5 System is cross-platform and runs anywhere OpenClaw / Claude Code is available (cross-platform).
Who created Rdk X5 System?
It is built and maintained by qiaolongli (@katherineedwards2475); the current version is v1.0.0.
More Skills