wjs-burning-subtitles

Video + SRT → video with subtitles. Also the final-encode stage for the localization pipeline: takes a video, an optional dub track from /wjs-dubbing-video, and an optional SRT to burn, and produces the upload-ready MP4 in one ffmpeg pass. No cascade of decodes/re-encodes.

When to use

• User has an SRT and wants it always-visible on the video (burn-in for 微信视频号 / 抖音 / WeChat — players that won't honor embedded subtitle tracks).
• User wants a togglable subtitle track (soft-mux) for QuickTime / VLC / IINA / mobile players that support mov_text.
• Final composite after /wjs-dubbing-video: burn target-language subs + mix dub over original-as-bed in one encode.

When NOT to use

• No SRT yet → run /wjs-transcribing-audio then /wjs-translating-subtitles first.
• HTML/CSS captions (kinetic, per-word highlights, custom fonts) on a clip composed in HyperFrames → use /wjs-overlaying-video instead. Don't mix libass burn-in with HyperFrames captions on the same output.
• The "subtitles" are actually motion graphics (animated callouts, lower-thirds with logos, kinetic typography) → that's /wjs-overlaying-video, not this skill.

The 3 modes of render.py

scripts/render.py auto-detects mode from flags:

1. Subtitles only — --video + --srt → re-encodes video with burned subs, original audio passes through.
2. Dub only — --video + --dub → keeps original video stream; replaces or mixes the audio track.
3. Full localized cut — --video + --srt + --dub → burns subs AND mixes dub. By default keeps original audio at low volume as a "bed" under the dub (set --bed-volume 0 or --no-original-audio to drop it).

Burn-in requires an ffmpeg built with libass. The script auto-downloads a static libass-enabled build from evermeet.cx into /tmp/ff_bin/ on first use if needed.

Soft-mux (togglable subtitle track)

Player apps can show/hide. Works with any ffmpeg build — does not need libass:

ffmpeg -i input.mp4 -i input.zh-CN.srt \
  -map 0:v -map 0:a -map 1:0 \
  -c:v copy -c:a copy -c:s mov_text \
  -metadata:s:s:0 language=zho -metadata:s:s:0 title="中文" \
  output.mp4

This is fast (stream-copy) and reversible. Use it when:

• Target platform supports embedded subs (YouTube auto-detects; VLC/QuickTime honors).
• User wants viewers to be able to toggle off.
• You don't want to re-encode the video.

render.py --video IN.mp4 --srt SUB.srt --soft-mux runs this path.

Hardcoded burn-in (always visible, libass)

Required for WeChat/抖音/朋友圈 etc. where the player will not honor embedded subtitle tracks.

Verify libass is available BEFORE promising burn-in

ffmpeg -filters 2>&1 | grep -E "subtitles|^.. ass "

If neither subtitles nor ass shows up, the build lacks libass. Homebrew's default ffmpeg formula is often stripped (no --enable-libass, no --enable-libfreetype, no drawtext). Don't waste time fighting the comma-escaping inside force_style — it will fail with No such filter: 'subtitles' no matter how the shell quotes it.

Fastest fix on macOS — drop in a static build, no system changes

curl -fsSL -o /tmp/ff.zip https://evermeet.cx/ffmpeg/getrelease/zip
unzip -o /tmp/ff.zip -d /tmp/ff_bin >/dev/null
FF=/tmp/ff_bin/ffmpeg
$FF -version | grep -oE -- "--enable-(libass|libfreetype)"

Then use $FF instead of ffmpeg for the render. The brew binary is fine for everything else (probe, audio extraction, soft-mux). render.py does this auto-fallback if its default ffmpeg lacks libass.

Burn-in render with style overrides

🛑 Checkpoint — confirm before full-render. Burn-in re-encodes the entire video (minutes of CPU on a 5-min clip). Before kicking it off:

1. Render only the first 30s with -t 30 for a fast preview.
2. Extract a frame from the longest-line cue (see Fontsize calibration below) and Read it.
3. Show the user the preview frame + the cue text, ask: "字号/字体/边距 OK 吗？OK 才跑全片。" Wait for explicit confirmation.

Skip the checkpoint only if the user has already approved a full render of this exact video at this exact font config in the same conversation.

$FF -i input.mp4 \
  -vf "subtitles=input.zh-CN.srt:force_style='Fontname=PingFang SC\,Fontsize=12\,PrimaryColour=&H00FFFFFF\,OutlineColour=&H00000000\,BorderStyle=1\,Outline=2\,Shadow=1\,MarginL=20\,MarginR=20\,MarginV=40'" \
  -c:v libx264 -crf 18 -preset medium -pix_fmt yuv420p \
  -c:a copy output.mp4

Inside force_style, escape every comma as \, (the filter graph parser eats the bare comma as a chain separator). All other special chars are fine.

Fontsize calibration — critical

libass scales its internal PlayRes up to the actual video resolution. The number you pass is not pixels in the output. As a starting calibration on a 544×960 vertical phone video, Fontsize=22 rendered each Chinese character at ~55px wide and overflowed the frame, while Fontsize=12 rendered at ~30–35px wide and fit cleanly with 15-char lines.

Rule of thumb: start at Fontsize=12, render, then always extract a frame and look:

$FF -ss 30 -i output.mp4 -frames:v 1 /tmp/frame.png -y
# then Read /tmp/frame.png to verify the longest-line cue fits

Pick a timestamp that lands on the cue with the most characters per line — short lines won't expose overflow. Add MarginL=20 MarginR=20 as a safety inset; never trust default left/right margins.

Style cheatsheet

Keys that matter (libass force_style):

• Fontname=PingFang SC — macOS default CJK; alternates: Songti SC, Heiti SC, STHeiti, Hiragino Sans GB.
• Fontsize=12 — start small, scale up only after frame check.
• PrimaryColour=&H00FFFFFF — white text (BBGGRR + alpha).
• OutlineColour=&H00000000 — black outline.
• BorderStyle=1 — outline only (clean over varied backgrounds). Use BorderStyle=3 for an opaque box behind text when the background is busy.
• Outline=2 — 2px outline thickness.
• Shadow=1 — subtle drop shadow.
• MarginL=20 MarginR=20 — keep text inside the frame.
• MarginV=40 — vertical distance from the bottom edge.

SRT line-length discipline for burn-in

Even with correct Fontsize, lines that are too long will wrap or overflow. Keep each on-screen line ≤ ~15 Chinese characters (~42 Latin chars). Use explicit \ line breaks inside the SRT block — do not rely on auto-wrapping. Two short lines beat one long one every time. (This is upstream discipline — /wjs-translating-subtitles should already cap cues at these limits.)

Audio mixing — keep the original as a low-volume bed

A pure dub-only track sounds dubbed (because it is). Mixing the original audio at low volume under the dub gives the "professional translation" feel — you still hear the speaker's breath, emphasis, and laughter, just under the new voice.

$FF -i original.mp4 -i dub.mp4 \
  -filter_complex "[0:a]volume=0.18[orig];\
                   [1:a]volume=1.0[dub];\
                   [orig][dub]amix=inputs=2:duration=longest:normalize=0[a]" \
  -map 0:v -map "[a]" \
  -c:v copy -c:a aac -b:a 192k mixed.mp4

Reasonable starting volumes:

• Original bed at 0.15–0.25 (≈ −16 to −12 dB)
• Dub at 1.0
• Use normalize=0 so amix doesn't auto-attenuate when both are active.

To drop the original entirely: --no-original-audio (equivalent to --bed-volume 0).

Combining dub + burn-in + bed (the full job)

One ffmpeg call does all three — burn the target subtitle onto the video stream and mix the two audio tracks:

$FF -i original.mp4 -i dub.mp4 \
  -filter_complex "[0:v]subtitles=input.zh-CN.srt:force_style='Fontname=PingFang SC\,Fontsize=12\,PrimaryColour=&H00FFFFFF\,OutlineColour=&H00000000\,BorderStyle=1\,Outline=2\,Shadow=1\,MarginL=20\,MarginR=20\,MarginV=40'[v];\
                   [0:a]volume=0.18[orig];[1:a]volume=1.0[dub];\
                   [orig][dub]amix=inputs=2:duration=longest:normalize=0[a]" \
  -map "[v]" -map "[a]" \
  -c:v libx264 -crf 18 -preset medium -pix_fmt yuv420p \
  -c:a aac -b:a 192k final.mp4

This is the "ship to social media" final cut. render.py --video original.mp4 --dub dub.mp4 --srt input.zh-CN.srt runs this exact pipeline.

Running render.py

# Subtitles only (burn):
python3 ~/.claude/skills/wjs-burning-subtitles/scripts/render.py \
    --video IN.mp4 --srt SUB.srt --out OUT.mp4

# Dub only (replace audio, no subs):
python3 ~/.claude/skills/wjs-burning-subtitles/scripts/render.py \
    --video IN.mp4 --dub IN_zh_dub.mp4 --out OUT.mp4

# Full localized cut (burn + dub + original bed):
python3 ~/.claude/skills/wjs-burning-subtitles/scripts/render.py \
    --video IN.mp4 --srt IN.zh-CN.srt --dub IN_zh_dub.mp4 --out OUT.mp4

# Soft-mux (no re-encode):
python3 ~/.claude/skills/wjs-burning-subtitles/scripts/render.py \
    --video IN.mp4 --srt SUB.srt --soft-mux --out OUT.mp4

See render.py --help for the full style/audio flag list (--font, --fontsize, --color, --outline-color, --margin-v, --bed-volume, --no-original-audio).

Output

• Burn mode: \x3Csource>_burned.mp4 (re-encoded, libass-rendered subs)
• Soft-mux mode: \x3Csource>_softsub.mp4 (stream-copy, mov_text track)
• Full cut: \x3Csource>_final.mp4 (re-encoded video with burned subs + mixed audio)

Anti-patterns

• ❌ Promising burn-in without verifying libass. Check ffmpeg -filters | grep subtitles first; auto-fall back to evermeet static build if missing.
• ❌ Committing a burn render without a frame check. Always extract a frame at the longest-line cue and Read it before kicking off the full render.
• ❌ Bare commas inside force_style. The filter graph parser eats them. Escape every internal comma as \,.
• ❌ Mixing libass burn-in with HyperFrames captions. Pick ONE caption system per output video. If you're using HTML/CSS captions in /wjs-overlaying-video, don't burn here too.
• ❌ Using period milliseconds in the SRT. Whisper local writes .mmm; libass tolerates it but other downstream tools choke. Normalize to ,mmm.
• ❌ Defaulting to BorderStyle=3 (opaque box). Use BorderStyle=1 (outline only) unless the background is genuinely busy — the box looks heavy and dated.

Upstream

• /wjs-transcribing-audio + /wjs-translating-subtitles — produce the SRT input.
• /wjs-dubbing-video — produces the *_\x3Clang>_dub.mp4 input for full-localized-cut mode. The dub-only file is technically a finished video; this skill is what mixes the original underneath and burns the subs to make it shippable.

Common pitfalls

• Fontsize that worked on one video looks tiny / huge on another. libass scales by PlayRes ratio, not pixels. Recalibrate per video resolution; don't trust a hardcoded value.
• Margin defaults clip text on vertical phone videos. Always set MarginL=20 MarginR=20 and MarginV=40 (or higher) explicitly.
• mov_text track shows up in QuickTime but not in some Android players. If the target audience is mobile-Chinese, soft-mux is unreliable; burn instead.
• Background-bus busy / contrast issues. Increase Outline=2 → Outline=3, or switch to BorderStyle=3 for a translucent box (BackColour=&H80000000 for 50% black).