Gate CrossEx Trading Suite

This skill is the unified entry point for Gate CrossEx cross-exchange trading. It supports lots of core operations: order management, position query, and history query. User intents are routed to corresponding workflows.

General Rules

⚠️ STOP — You MUST read and strictly follow the shared runtime rules before proceeding. Do NOT select or call any tool until all rules are read. These rules have the highest priority. → Read gate-runtime-rules.md

• Only call MCP tools explicitly listed in this skill. Tools not documented here must NOT be called, even if they exist in the MCP server.

MCP Dependencies

Required MCP Servers

MCP Tools Used

Query Operations (Read-only)

• cex_crx_get_crx_account
• cex_crx_get_crx_fee
• cex_crx_get_crx_interest_rate
• cex_crx_get_crx_margin_positions_leverage
• cex_crx_get_crx_order
• cex_crx_get_crx_positions_leverage
• cex_crx_list_crx_account_book
• cex_crx_list_crx_adl_rank
• cex_crx_list_crx_coin_discount_rate
• cex_crx_list_crx_history_margin_interests
• cex_crx_list_crx_history_margin_positions
• cex_crx_list_crx_history_orders
• cex_crx_list_crx_history_positions
• cex_crx_list_crx_history_trades
• cex_crx_list_crx_margin_positions
• cex_crx_list_crx_open_orders
• cex_crx_list_crx_positions
• cex_crx_list_crx_rule_risk_limits
• cex_crx_list_crx_rule_symbols
• cex_crx_list_crx_transfer_coins
• cex_crx_list_crx_transfers

Execution Operations (Write)

• cex_crx_cancel_crx_order
• cex_crx_close_crx_position
• cex_crx_create_crx_convert_order
• cex_crx_create_crx_convert_quote
• cex_crx_create_crx_order
• cex_crx_create_crx_transfer
• cex_crx_update_crx_account
• cex_crx_update_crx_margin_positions_leverage
• cex_crx_update_crx_order
• cex_crx_update_crx_positions_leverage

Authentication

• API Key Required: Yes (see skill doc/runtime MCP deployment)
• Permissions: Crx:Write
• Get API Key: https://www.gate.io/myaccount/profile/api-key/manage

Installation Check

• Required: Gate (main)
• Install: Run installer skill for your IDE
  • Cursor: gate-mcp-cursor-installer
  • Codex: gate-mcp-codex-installer
  • Claude: gate-mcp-claude-installer
  • OpenClaw: gate-mcp-openclaw-installer

MCP Mode

Read and strictly follow references/mcp.md, then execute this skill's CrossEx workflow.

• SKILL.md keeps route dispatch and feature boundaries.
• references/mcp.md is the authoritative MCP execution layer for query/mutation sequencing, confirmation gates, and risk-aware updates.

Module Overview

Routing Rules

MCP Tools

This skill uses the CrossEx MCP toolset with the cex_crx prefix as its only core tool family.

Scope rule: Only execute operations explicitly documented in this skill. Only call tools listed in the tables below or in references/*.md. Tools or operations not mentioned here must not be called.

Tool Naming Convention

• List operations in the cex_crx family query symbols, orders, positions, transfers, or history
• Get operations in the cex_crx family query a single account setting, fee, rate, or order detail
• Create operations in the cex_crx family create an order, transfer, convert quote, or convert order
• Update operations in the cex_crx family update account settings, leverage, or existing orders
• Cancel operations in the cex_crx family cancel an existing order
• Close operations in the cex_crx family close an existing position

Symbol And Rule Tools

Account Tools

Transfer And Convert Tools

Order Tools

Position And Leverage Tools

Usage Guidance

• Use the cex_crx MCP family as the default and only core MCP family for this skill.
• Use list/get tools to query symbol rules, fees, balances, leverage, or supported assets.
• Prefer history and account-book tools when the user asks for records, audit trails, or status verification.

Execution

1. Intent and Parameter Identification

• Determine module (orders/positions/history)
• Extract key parameters:
  • Trading Pair: GATE_SPOT_BTC_USDT, GATE_MARGIN_XRP_USDT, GATE_FUTURE_ETH_USDT
  • Exchange: GATE, BINANCE, OKX, BYBIT
  • Direction: BUY (buy/long), SELL (sell/short)
  • Quantity: USDT amount, coin quantity, contract size
  • Price: Limit, market
  • Leverage: Leverage multiplier (margin/futures only)
  • Position Side: LONG (long), SHORT (short, margin/futures only)
• Missing Parameters: If required parameters are missing, ask user

2. Pre-checks

• Trading Pair: Call cex_crx_list_crx_rule_symbols to verify
• Account Balance: Call cex_crx_get_crx_account to check if available margin is sufficient
• Position Check:
  • Margin Trading: Check existing positions to avoid direction conflicts
  • Futures Trading: Check dual-direction position mode
• Minimum Amount: Query min_quote_amount (typically 3 USDT)
• Exchange Status: Verify target exchange is operating normally

3. Module Logic

Module A: Spot Trading

1. Parameter Confirmation:
   • Trading pair format: GATE_SPOT_{BASE}_{QUOTE}
   • Buy parameters: quote_qty (USDT amount)
   • Sell parameters: qty (coin quantity)
2. Minimum Amount Check: Call cex_crx_list_crx_rule_symbols to query minimum amount
3. Pre-order Confirmation: Display order summary (pair, direction, quantity, price), require user confirmation
4. Place Order: Call cex_crx_create_crx_order
5. Verification: Call cex_crx_get_crx_order to confirm order status

Module B: Margin Trading

1. Parameter Confirmation:
   • Trading pair format: GATE_MARGIN_{BASE}_{QUOTE}
   • Required parameters: qty (coin quantity), position_side (LONG or SHORT)
   • Optional parameters: quote_qty (USDT amount)
2. Leverage Check: Query current leverage, adjust if user specifies
3. Position Direction:
   • Long (LONG): Buy coin, borrow USDT
   • Short (SHORT): Sell coin, borrow coin
4. Minimum Amount Check: Call cex_crx_list_crx_rule_symbols to query minimum amount
5. Pre-order Confirmation: Display order summary (pair, direction, quantity, leverage), require confirmation
6. Place Order: Call cex_crx_create_crx_order with parameter position_side
7. Verification: Call cex_crx_list_crx_margin_positions with a symbol filter to confirm position

Module C: Futures Trading

1. Parameter Confirmation:
   • Trading pair format: GATE_FUTURE_{BASE}_{QUOTE}
   • Required parameters: qty (contract size), position_side (LONG or SHORT)
2. Leverage Adjustment: If user specifies leverage, call cex_crx_get_crx_positions_leverage and cex_crx_update_crx_positions_leverage
3. Contract Size Calculation (if ordering by value):
   • Get quanto_multiplier and current price
   • Round down to ensure overspending is avoided
4. Minimum Size Check: Call cex_crx_list_crx_rule_symbols to query minimum size
5. Pre-order Confirmation: Display order summary (pair, direction, size, leverage), require confirmation
6. Place Order: Call cex_crx_create_crx_order with parameter position_side
7. Verification: Call cex_crx_list_crx_positions with a symbol filter to confirm position

Module D: Cross-Exchange Transfer

1. Transfer Type:
   • Cross-exchange transfer: cex_crx_create_crx_transfer (Exchange A -> Exchange B)
2. Parameter Confirmation:
   • Cross-exchange transfer: from, to, coin, amount
   • From/To Account Rules:

     Coin	Mode	Valid from / to	Defaults
     USDT	Cross-Exchange	SPOT ↔ CROSSEX	CROSSEX_{exchange_type} → CROSSEX
     USDT	Sub-Exchange	SPOT ↔ CROSSEX_{exchange_type} or CROSSEX_{exchange_type} ↔ CROSSEX_{exchange_type}	CROSSEX → CROSSEX_GATE
     Non-USDT	Any	Must use CROSSEX_{exchange_type} (never CROSSEX alone). Cross-exchange transfers allowed (e.g., CROSSEX_BINANCE ↔ CROSSEX_GATE).	—

3. Supported Coin Check: Call cex_crx_list_crx_transfer_coins to verify
4. Balance Check: Confirm source account has sufficient balance
5. Pre-transfer Confirmation: Display transfer summary (source, destination, coin, quantity), require confirmation
6. Execute Transfer: Call cex_crx_create_crx_transfer
7. Verification: Call cex_crx_list_crx_transfers to query transfer history and confirm

Module E: Convert Trading

1. Convert Type:
   • Flash convert quote: cex_crx_create_crx_convert_quote
   • Flash convert execution: cex_crx_create_crx_convert_order
2. Parameter Confirmation:
   • Flash convert: from_coin, to_coin, from_amount, exchange_type
3. Balance Check: Confirm source account has sufficient balance for the convert pair
4. Pre-convert Confirmation: Display source asset, target asset, rate, and expected receive amount, then require confirmation
5. Quote: Call cex_crx_create_crx_convert_quote
6. Execute Convert: Call cex_crx_create_crx_convert_order with the returned quote_id
7. Verification: Call cex_crx_get_crx_account to confirm resulting balances

Module F: Order Management

1. Query Orders:
   • Current open orders: Call cex_crx_list_crx_open_orders
   • Order details: Call cex_crx_get_crx_order
   • Order History: Call cex_crx_list_crx_history_orders (parameters: limit, page, from, to)
2. Cancel Orders:
   • Single cancel: Call cex_crx_cancel_crx_order
3. Amend Orders:
   • Check order status must be open
   • Call cex_crx_update_crx_order to amend price or quantity
4. Display Results: Display order information in table format

Module G: Position Query

1. Query Types:
   • Futures positions: Call cex_crx_list_crx_positions
   • Margin positions: Call cex_crx_list_crx_margin_positions
   • Futures leverage: Call cex_crx_get_crx_positions_leverage
   • Margin leverage: Call cex_crx_get_crx_margin_positions_leverage
2. History Query:
   • Position History: Call cex_crx_list_crx_history_positions (parameters: limit, page, from, to)
   • Margin Position History: Call cex_crx_list_crx_history_margin_positions
   • Trade History: Call cex_crx_list_crx_history_trades (parameters: limit, page, from, to)
3. Display Format:
   • Current positions: Table format (pair, direction, quantity, entry price, unrealized PnL)
   • History records: Reverse chronological order, display recent N records

Module H: History Query

1. Order History:
   • Call cex_crx_list_crx_history_orders
   • Parameters: limit (max 100), page, from (start timestamp), to (end timestamp)
2. Trade History:
   • Call cex_crx_list_crx_history_trades
   • Same parameters as above
3. Position History:
   • Call cex_crx_list_crx_history_positions
   • Same parameters as above
4. Margin Position History:
   • Call cex_crx_list_crx_history_margin_positions
   • Same parameters as above
5. Margin Interest History:
   • Call cex_crx_list_crx_history_margin_interests
   • Same parameters as above

Report Template

After each operation, output a concise standardized result.

Safety Rules

• Credentials: Never prompt or induce the user to paste API Secret Key into chat; prefer secure local MCP configuration.
• User-to-User Transfer: This skill does not support P2P or user-to-user transfers; only transfers between the user's own accounts (e.g., SPOT ↔ CROSSEX) are allowed.
• Trade Orders: Display complete order summary (pair, direction, quantity, price, leverage), require user confirmation before placing order
• Cross-Exchange Transfer: Display transfer details (source, destination, quantity, arrival time), require confirmation
• Scope rule: Only call tools documented in this skill. If the user requests an operation not documented here, respond that it is not supported by this skill.
• Batch Operations: Display operation scope and impact, require explicit confirmation

Example: "Reply 'confirm' to execute the above operation."

Error Handling