Description

Control Netatmo thermostat and read weather station data. Use for heating control (set temperature, change mode), checking indoor/outdoor temperatures, CO₂ levels, humidity, noise, and pressure readings.

README (SKILL.md)

Netatmo

Name: Netatmo
Author: florianbeer

Control Netatmo smart home devices via netatmo CLI.

Setup

Credentials in ~/.config/netatmo/:

credentials.json: {"client_id": "...", "client_secret": "..."}
tokens.json: OAuth tokens (auto-refreshed)

Commands

netatmo status              # Full overview (thermostat + all sensors)
netatmo thermostat          # Thermostat details only
netatmo weather             # All sensors including Office
netatmo history             # 7-day temperature history with sparklines
netatmo history --days 14   # Custom period
netatmo set 21              # Set target temp (7-30°C, 3h manual mode)
netatmo mode schedule       # Resume schedule
netatmo mode away           # Away mode (12°C)
netatmo mode hg             # Frost guard (7°C)
netatmo \x3Ccmd> --json        # JSON output for any command

Available Data

Location	Temp	Humidity	CO₂	Noise	Pressure	Battery
Bedroom (main)	✓	✓	✓	✓	✓	—
Outdoor	✓	✓	—	—	✓*	✓
Living Room	✓	✓	✓	—	—	✓
Office	✓	—	—	—	—	—

*Pressure displayed with Outdoor (sensor in main station)

Notes

CO₂ >1000 ppm = poor ventilation
set uses manual mode for 3h, then reverts to schedule
Tokens auto-refresh on expiry
History shows ASCII sparklines for temperature trends

Usage Guidance

This skill appears to implement legitimate Netatmo operations, but it contains important omissions. Before installing: 1) Verify the skill's origin (owner is unknown) and prefer an official/verified source. 2) Confirm you have the `netatmo` CLI installed from an official release; the skill assumes that binary but doesn't declare it. 3) Inspect ~/.config/netatmo/credentials.json and tokens.json — they hold client_id/client_secret and OAuth tokens; only allow access if you trust the skill. 4) If you want to proceed, ask the author to update metadata to list the required binary and declare the config path(s) or to use environment variables so permissions are explicit. 5) Consider running the skill in an isolated account or VM, or deny agent access to your home config if you cannot verify the skill. If you cannot confirm provenance and trust, treat this as risky and avoid installing.

Capability Analysis

Type: OpenClaw Skill Name: netatmo Version: 1.0.1 The skill bundle appears benign. It describes a legitimate interface for controlling Netatmo devices and reading sensor data via a `netatmo` CLI tool. The `SKILL.md` file outlines the setup for credentials (`client_id`, `client_secret`, OAuth tokens) in `~/.config/netatmo/`, which is necessary for the stated purpose of interacting with the Netatmo API. There is no evidence of prompt injection, data exfiltration, malicious execution, persistence mechanisms, or obfuscation. All described commands and functionalities align with the stated purpose.

Capability Assessment

ℹ Purpose & Capability

The stated purpose (control Netatmo devices and read sensors) aligns with the SKILL.md commands (uses a `netatmo` CLI and standard Netatmo operations). However the skill metadata declares no required binaries or credentials even though the instructions require a local `netatmo` CLI and credentials files under ~/.config/netatmo/. The capability is plausible but the skill should explicitly declare these dependencies.

⚠ Instruction Scope

SKILL.md tells the agent to use `netatmo` CLI and to read/write credentials in ~/.config/netatmo/ (credentials.json with client_id/client_secret and tokens.json with OAuth tokens). Those files are sensitive (contain client secrets and access/refresh tokens). The skill does not declare that it will read those files, nor does it constrain or explain how tokens are handled. While reading those files is required to operate, the omission is a scope/transparency problem.

✓ Install Mechanism

This is an instruction-only skill with no install spec or code to write to disk, which reduces install-side risk. The tradeoff is that it implicitly relies on an external binary (`netatmo`) being present — that dependency is not declared.

⚠ Credentials

No environment variables or primary credential are declared in the skill metadata, yet the runtime instructions require access to user-local credential files (~/.config/netatmo/credentials.json and tokens.json). Those files contain secrets (client_id/client_secret and OAuth tokens). The requested access is proportionate to Netatmo integration, but the omission in metadata is a transparency and least-privilege concern.

✓ Persistence & Privilege

The skill does not request always:true or other elevated persistence; it is user-invocable and allowed to be invoked autonomously by default (platform normal). It does mention tokens auto-refreshing (which implies writing tokens.json), but there is no indication the skill modifies unrelated agent settings or other skills.

Version History

v1.0.1

Added ASCII sparkline graphs to history command

v1.0.0

Initial release: thermostat control, weather stations, temperature history with sparklines

Metadata

Slug netatmo

Version 1.0.1

License —

All-time Installs 0

Active Installs 0

Total Versions 2

Frequently Asked Questions

What is Netatmo?

Control Netatmo thermostat and read weather station data. Use for heating control (set temperature, change mode), checking indoor/outdoor temperatures, CO₂ levels, humidity, noise, and pressure readings. It is an AI Agent Skill for Claude Code / OpenClaw, with 1973 downloads so far.

How do I install Netatmo?

Run "/install netatmo" in the OpenClaw or Claude Code chat to install it in one step — no extra setup required.

Is Netatmo free?

Yes, Netatmo is completely free (open-source). You can download, install and use it at no cost.

Which platforms does Netatmo support?

Netatmo is cross-platform and runs anywhere OpenClaw / Claude Code is available (cross-platform).

Who created Netatmo?

It is built and maintained by Florian Beer (@florianbeer); the current version is v1.0.1.

More Skills

Netatmo

Netatmo

Setup

Commands

Available Data

Notes

What is Netatmo?

How do I install Netatmo?

Is Netatmo free?

Which platforms does Netatmo support?

Who created Netatmo?

💬 Comments