← Back to Skills Marketplace
13977660642

Contract Risk Review Assistant

by 13977660642 · GitHub ↗ · v1.0.0 · MIT-0
cross-platform ✓ Security Clean
104
Downloads
0
Stars
0
Active Installs
1
Versions
Install in OpenClaw
/install hetong-fengxian
Description
智能审查施工合同条款,识别高风险支付、工期、索赔和结算风险,提供风险评级及谈判策略建议。
README (SKILL.md)

合同风险审查助手 v2.0

一句话:施工企业合同卫士,识别陷阱条款避免损失

description

智能合同风险审查工具,帮助识别工程合同中的风险条款、陷阱条款、不公平条款。适用于合同签订前的风险评估和谈判策略制定。

trigger

  • 合同审查、合同风险、合同审核
  • 合同条款、霸王条款、陷阱
  • 招标文件、合同谈判
  • 工程结算、工程款支付
  • 违约责任、索赔条款
  • 背靠背付款、审减限制

steps

🔍 第一步:基本信息提取

合同类型 | 甲乙方 | 合同金额
工期要求 | 付款方式 | 质保期限

💰 第二步:支付条款审查

审查要点

条款 标准值 风险阈值 风险等级
预付款 ≥10% \x3C5% 🔴高
进度款 月付 季度付 🟡中
结算款 28天审核 无限期 🔴高
质保金 ≤3% >5% 🔴高
质保期 2年 >5年 🟡中

⏰ 第三步:工期条款审查

风险检查清单

  • 开工条件是否明确
  • 工期延误责任划分
  • 不可抗力定义
  • 顺延工期条件
  • 节点工期要求

📋 第四步:变更索赔审查

索赔时效陷阱

风险类型 条款描述 风险等级
无期限索赔 任何时候都可提出索赔 🟢低
7天索赔 发生后7天内提出 🔴高
28天索赔 发生后28天内提出 🟡中
优先审查 变更必须先审批后施工 🟡中

🏁 第五步:结算条款审查

审减陷阱识别

🔴 高风险条款:
"工程结算审减额超过报送金额15%的部分,由施工方承担"

🟡 中风险条款:
"工程结算须经第三方审计,审计结果作为最终结算依据"

🟢 低风险条款:
"工程验收合格后30日内完成结算审核"

⚠️ 第六步:风险等级评估

综合评估表

风险类别 风险数量 最高等级 综合评级
支付风险 X项 🔴/🟡/🟢 X级
工期风险 X项 🔴/🟡/🟢 X级
变更风险 X项 🔴/🟡/🟢 X级
结算风险 X项 🔴/🟡/🟢 X级
总体风险 - - X级

📝 第七步:谈判策略制定

必改条款清单

优先级排序:
P0 - 必须修改(可能造成重大损失)
P1 - 强烈建议修改(风险较高)
P2 - 争取修改(存在风险但可控)
P3 - 可接受(风险可控)

风险条款清单

🔴 P0级 - 致命风险(必须修改)

条款类型 风险描述 损失估算 修改建议
审减超限自担 审减超15%部分由施工方承担 可能损失10-30%工程款 删除或设5%上限
无上限赔偿 任何损失均需赔偿 潜在无限责任 设为合同额20%
背靠背付款 收到业主款才付乙方 长期拖欠风险 改为独立付款义务
无限期质保 质保期超过5年 维保成本增加 按国标2年执行
强制仲裁 指定有利于甲方的仲裁机构 维权成本高 改为工程所在地仲裁

🟡 P1级 - 高风险(强烈建议修改)

条款类型 风险描述 损失估算 修改建议
7天索赔时效 事件发生后7天内必须提出 逾期无法索赔 争取28天
低于成本报价 甲方有权认定并调整报价 亏损风险 删除此条款
强制品牌限定 材料必须使用甲方指定品牌 成本增加 增加"同等档次"选项
验收标准模糊 验收标准不明确 反复整改 明确国标/行标
任意解除权 甲方可随时解除合同 预期利润损失 增加补偿条款

🟢 P2级 - 中风险(可协商修改)

条款类型 风险描述 损失估算 修改建议
低预付款 预付款\x3C10% 资金压力 争取10-15%
质保金过高 质保金>3% 资金占用 控制在3%以内
拖延付款 拖延30天内不计违约 利息损失 改为拖延即违约
严苛罚款 节点延误每天罚款合同额1‰ 累积罚款大 争取0.5‰
指定分包 甲方指定分包单位 管理协调难 增加配合费条款

合同条款评估表

评分规则

评分 风险等级 行动建议
90-100分 🟢优秀 可接受
70-89分 🟡良好 小修改
50-69分 🟠一般 需谈判
30-49分 🔴较差 慎重签约
\x3C30分 ⛔危险 建议放弃

评分维度

维度 权重 评分 加权得分
付款条件 25% 0-100 XX
工期要求 15% 0-100 XX
变更索赔 20% 0-100 XX
结算条款 20% 0-100 XX
质保条款 10% 0-100 XX
违约责任 10% 0-100 XX
总分 100% - XX

谈判话术模板

💰 付款条款谈判

我方:
"关于预付款比例,建议调整为15%,这样可以有效降低双方的履约风险。"

参考话术:
"根据行业惯例,预付款通常在10%-15%之间,这样既能保证甲方资金安全,也能确保乙方正常启动项目。"

⏰ 索赔时效谈判

我方:
"建议将索赔时效调整为28天,给双方充足的时间收集证据和评估损失。"

参考话术:
"索赔涉及事实调查、损失核算等多个环节,7天时间过于紧迫,容易导致证据灭失,不利于双方公平处理争议。"

📋 审减条款谈判

我方:
"建议设置审减上限为8%,超出部分由甲方承担咨询费。"

参考话术:
"审减超过一定比例通常意味着审核过程中存在较大分歧,应由甲方承担审核成本,这样才能促使审核严谨认真。"

输出格式

格式 内容 用途
Word 完整风险审查报告 存档/汇报
Excel 风险清单打分表 量化评估
Markdown 谈判策略备忘录 内部使用

适用客户

  • 🏗️ 施工企业法务部
  • 💼 经营人员
  • 📋 项目经理
  • ⚖️ 律师/法务顾问

定价参考

版本 价格 功能
单次版 ¥99 单份合同审查
月卡版 ¥399 一个月无限用
年卡版 ¥999 一年无限用

市场对比:律师审查¥3000-10000/份,我们¥99/次,省钱90%

案例展示

案例1:某总承包合同审查

合同金额:8000万元
发现问题:5个P0级风险、3个P1级风险

主要风险:
1. 🔴审减超15%自担(预估损失可达800万)
2. 🔴背靠背付款(资金占用利息每年约100万)
3. 🔴7天索赔时效(极易逾期)

谈判结果:
- 审减上限设为8%
- 删除背靠背付款条款
- 索赔时效改为28天

节省潜在损失:约1000万元

案例2:某分包合同审查

合同金额:500万元
发现问题:2个P0级风险、4个P1级风险

主要风险:
1. 🔴质保金10%(资金占用大)
2. 🟡验收标准模糊(整改成本高)

谈判结果:
- 质保金改为5%
- 明确验收标准

节省成本:约50万元

使用示例

示例1:快速合同审查

用户:帮我审查这份合同的风险

小道童:
请粘贴合同文本,或描述关键条款:

需要重点关注:
1. 预付款比例?
2. 进度款支付周期?
3. 结算审核期限?
4. 质保金比例?
5. 质保期限?
6. 索赔时效?
7. 违约责任?

【或者直接上传合同文本】

来源

融合三省六部架构 v7.0 芒格「逆向思考」思维模型 塔勒布「反脆弱」理念

版本

v2.0 - 2026-04-07

  • 新增P0/P1/P2三级分类
  • 新增量化评分系统
  • 新增谈判话术模板
  • 新增30+风险条款库
Usage Guidance
This skill appears coherent and does what it says: provide checklists, scoring and negotiation templates for construction contracts. Before using: (1) Do not paste sensitive credentials or confidential personally-identifying information into the tool unless you trust the hosting platform and its data-retention/privacy policies. (2) Treat the output as advisory — it is not a substitute for licensed legal advice, especially for high-value or jurisdiction-specific disputes; have a qualified lawyer review critical changes. (3) Confirm how uploaded contract text is stored or logged by the platform if confidentiality is a concern. (4) Because the skill source/homepage is unknown, prefer testing it on non-sensitive sample contracts first and verify outputs against human review.
Capability Analysis
Type: OpenClaw Skill Name: hetong-fengxian Version: 1.0.0 The skill bundle is a specialized contract risk assessment tool for construction projects, consisting solely of metadata and Markdown instructions (SKILL.md). It provides a structured framework for an AI agent to identify high-risk clauses such as 'back-to-back' payment terms and claim deadlines. There is no executable code, no evidence of data exfiltration, and no malicious prompt injection intended to subvert the agent's behavior or access sensitive system resources.
Capability Assessment
Purpose & Capability
Name and description (construction contract risk review) match the SKILL.md content: checklists, scoring, negotiation templates and output formats. The skill does not request unrelated credentials, binaries, or config paths.
Instruction Scope
SKILL.md is a self-contained, deterministic set of steps and templates for analysing contract text and producing reports. It asks the user to paste or upload contract text and does not instruct the agent to read unrelated files, environment variables, or to transmit data to third-party endpoints.
Install Mechanism
No install spec and no code files — instruction-only. Nothing is written to disk or fetched at install time.
Credentials
The skill declares no environment variables, credentials, or config paths. The functionality described (text analysis, checklists, templates) does not require secrets or external service credentials.
Persistence & Privilege
always:false and user-invocable:true. The skill does not request persistent privileges or modify other skills or system-wide settings.
How to Use
  1. Make sure OpenClaw is installed (local or Docker)
  2. Run the install command in chat: /install hetong-fengxian
  3. After installation, invoke the skill by name or use /hetong-fengxian
  4. Provide required inputs per the skill's parameter spec and get structured output
Version History
v1.0.0
合同风险审查助手 v2.0 重大更新: - 增加P0/P1/P2分级风险条款库,突出高风险条款并明确修改建议。 - 全新量化评分系统,支持合同全维度打分与综合评级。 - 丰富谈判话术模板,覆盖主要合同条款场景。 - 补充详细案例分析,直观展示风险发现与优化成果。 - 明确输出格式、适用客户和定价体系,方便用户选择和应用。
Metadata
Slug hetong-fengxian
Version 1.0.0
License MIT-0
All-time Installs 0
Active Installs 0
Total Versions 1
Frequently Asked Questions

What is Contract Risk Review Assistant?

智能审查施工合同条款,识别高风险支付、工期、索赔和结算风险,提供风险评级及谈判策略建议。 It is an AI Agent Skill for Claude Code / OpenClaw, with 104 downloads so far.

How do I install Contract Risk Review Assistant?

Run "/install hetong-fengxian" in the OpenClaw or Claude Code chat to install it in one step — no extra setup required.

Is Contract Risk Review Assistant free?

Yes, Contract Risk Review Assistant is completely free, licensed under MIT-0. You can download, install and use it at no cost.

Which platforms does Contract Risk Review Assistant support?

Contract Risk Review Assistant is cross-platform and runs anywhere OpenClaw / Claude Code is available (cross-platform).

Who created Contract Risk Review Assistant?

It is built and maintained by 13977660642 (@13977660642); the current version is v1.0.0.

💬 Comments