← Back to Skills Marketplace
IoT智能设备管理
by
ai-gaoqian
· GitHub ↗
· v1.0.0
· MIT-0
29
Downloads
0
Stars
0
Active Installs
1
Versions
Install in OpenClaw
/install iot-smart-device-manager
Description
面向智能家居和工业物联网场景的设备监控、协议适配（MQTT/CoAP/Zigbee）、故障诊断、自动化规则配置和能耗优化
README (SKILL.md)
IoT智能设备管理
使用方式
用户描述IoT设备管理需求，包括设备接入、协议配置、自动化场景编排、故障排查、能耗分析等。
执行流程
- 设备发现：识别网络中的IoT设备并确认通信协议（MQTT/CoAP/Zigbee/BLE/WiFi）
- 协议适配：生成MQTT topic配置、CoAP端点定义、Zigbee cluster映射
- 自动化规则：使用if-this-then-that模式编排设备联动规则
- 故障诊断：分析设备离线原因并提供排查步骤
- 能耗分析：计算设备功耗并推荐优化策略
输出格式
- 设备拓扑图（设备列表及通信关系）
- MQTT主题树和payload格式定义
- 自动化场景YAML配置文件
- 故障排查决策树
- 能耗报告（按设备/时段/场景分析）
注意事项
- 支持主流IoT平台（Home Assistant/Tuya/AWS IoT/Azure IoT Hub）
- MQTT配置默认使用TLS加密
- 自动化规则支持时间/传感器/设备状态等多条件触发
- 故障诊断需考虑网络层/应用层/硬件层三级排查
Usage Guidance
Review this skill before installing. Use it only if you are comfortable granting shell access for IoT diagnostics, and require explicit confirmation before any command runs, especially commands involving local networks, device control, credentials, or configuration changes.
Capability Assessment
Purpose & Capability
The stated IoT support purpose is coherent with guidance, configuration generation, diagnostics, and reporting, but shell execution is high-impact and the supplied artifact evidence does not show narrow command limits or clear user-controlled execution rules.
Instruction Scope
The invocation scope appears broad for loosely related IoT/device-management requests, which compounds the risk of an agent using shell access outside a tightly defined diagnostic workflow.
Install Mechanism
No separate installer, executable payload, package script, or hidden install behavior was identified in the supplied evidence.
Credentials
Local command execution can be proportionate for device diagnostics, but it should be limited to explicit, user-approved diagnostic actions and should avoid broad network discovery, credential handling, or device-control commands unless clearly requested.
Persistence & Privilege
No evidence was supplied of persistence, background workers, privilege escalation, credential storage, or automatic recurring execution.
How to Use
- Make sure OpenClaw is installed (local or Docker)
- Run the install command in chat:
/install iot-smart-device-manager - After installation, invoke the skill by name or use
/iot-smart-device-manager - Provide required inputs per the skill's parameter spec and get structured output
Version History
v1.0.0
Initial-release-IoT-smart-device-management
Metadata
Frequently Asked Questions
What is IoT智能设备管理?
面向智能家居和工业物联网场景的设备监控、协议适配（MQTT/CoAP/Zigbee）、故障诊断、自动化规则配置和能耗优化. It is an AI Agent Skill for Claude Code / OpenClaw, with 29 downloads so far.
How do I install IoT智能设备管理?
Run "/install iot-smart-device-manager" in the OpenClaw or Claude Code chat to install it in one step — no extra setup required.
Is IoT智能设备管理 free?
Yes, IoT智能设备管理 is completely free, licensed under MIT-0. You can download, install and use it at no cost.
Which platforms does IoT智能设备管理 support?
IoT智能设备管理 is cross-platform and runs anywhere OpenClaw / Claude Code is available (cross-platform).
Who created IoT智能设备管理?
It is built and maintained by ai-gaoqian (@ai-gaoqian); the current version is v1.0.0.
More Skills