/install bitcoin-arkade
Arkade SDK Development Guide
Arkade is a programmable Bitcoin execution layer. It uses VTXOs (Virtual Transaction Outputs) to enable instant offchain Bitcoin transactions with near-zero fees, while users retain full self-custody and unilateral exit rights. No changes to Bitcoin are required.
SDK Installation & Setup
npm install @arkade-os/sdk
Requires Node.js >= 22.
import { SingleKey, Wallet } from "@arkade-os/sdk";
// Create an identity (private key)
const identity = SingleKey.fromHex("your-private-key-hex");
// Or generate a new one:
// const identity = SingleKey.fromRandomBytes();
const wallet = await Wallet.create({
identity,
arkServerUrl: "https://arkade.computer",
});
const address = await wallet.getAddress();
console.log("Ark Address:", address);
For production, always use a secure key management solution rather than hardcoded keys.
Core Wallet Operations
Addresses
// Offchain Ark address (ark1.../tark1...) — for instant payments
const arkAddress = await wallet.getAddress();
// Boarding address — for receiving onchain BTC to be onboarded later
const boardingAddress = await wallet.getBoardingAddress();
Balances
const balance = await wallet.getBalance();
console.log("Available:", balance.available, "sats"); // spendable now
console.log("Total:", balance.total, "sats"); // includes recoverable
console.log("Settled:", balance.settled, "sats"); // Bitcoin-anchored
console.log("Preconfirmed:", balance.preconfirmed, "sats"); // cosigned
// Pending onchain deposits
console.log("Boarding:", balance.boarding.total, "sats");
Sending Payments
// Send to an Ark address — instant, near-zero fees
const txid = await wallet.sendBitcoin({
address: "ark1...",
amount: 50000, // satoshis
});
For onchain destinations (bc1.../tb1...), use the Ramps offboard flow below. For Lightning invoices, use @arkade-os/boltz-swap.
Receiving Payments
const address = await wallet.getAddress();
// Share this address with the sender
// Monitor for incoming funds
const stop = wallet.notifyIncomingFunds(async (notification) => {
if (notification.type === "vtxo") {
for (const vtxo of notification.vtxos) {
console.log(`Received ${vtxo.amount} sats`);
}
}
});
// Call stop() when done listening
VTXOs
const vtxos = await wallet.getVtxos();
for (const vtxo of vtxos) {
console.log(vtxo.txid, vtxo.amount, vtxo.status);
}
Onchain Ramps (Onboard / Offboard)
Convert between onchain Bitcoin UTXOs and offchain Arkade VTXOs. Best for large transfers; for everyday amounts, Lightning swaps have lower overhead.
import { Ramps } from "@arkade-os/sdk";
const ramps = new Ramps(wallet);
// Get fee info from the Ark server
const info = await wallet.arkProvider.getInfo();
// Onboard: convert boarding UTXOs to VTXOs
const commitmentTxid = await ramps.onboard(info.fees);
// Offboard: convert VTXOs to onchain BTC
const exitTxid = await ramps.offboard(
"bc1q...", // destination onchain address
info.fees,
// amount, // optional — defaults to all available
);
Lightning Network
npm install @arkade-os/boltz-swap
Lightning integration uses Boltz submarine swaps to bridge between Arkade and the Lightning Network.
import { ArkadeLightning, BoltzSwapProvider } from "@arkade-os/boltz-swap";
const swapProvider = new BoltzSwapProvider({
apiUrl: "https://api.ark.boltz.exchange",
network: "bitcoin",
});
const lightning = new ArkadeLightning({
wallet,
swapProvider,
});
// Receive via Lightning (reverse swap)
const { invoice, paymentHash } = await lightning.createLightningInvoice({
amount: 25000,
});
console.log("Pay this:", invoice);
// Send via Lightning (submarine swap)
const result = await lightning.sendLightningPayment({
invoice: "lnbc...",
});
console.log("Preimage:", result.preimage);
Boltz API Endpoints
| Network | URL |
|---|---|
| Bitcoin mainnet | https://api.ark.boltz.exchange |
| Mutinynet | https://api.boltz.mutinynet.arkade.sh |
| Regtest (local) | http://localhost:9069 |
Skill Classes (this package)
This package (@arkade-os/skill) provides higher-level wrapper classes over the SDK:
npm install @arkade-os/skill
import { Wallet, SingleKey } from "@arkade-os/sdk";
import {
ArkadeBitcoinSkill,
ArkaLightningSkill,
LendaSwapSkill,
} from "@arkade-os/skill";
const wallet = await Wallet.create({
identity: SingleKey.fromHex(privateKeyHex),
arkServerUrl: "https://arkade.computer",
});
// Bitcoin: addresses, balances, send/receive, onboard/offboard
const bitcoin = new ArkadeBitcoinSkill(wallet);
const balance = await bitcoin.getBalance();
await bitcoin.send({ address: "ark1...", amount: 50000 });
// Lightning: invoices, payments via Boltz
const lightning = new ArkaLightningSkill({ wallet, network: "bitcoin" });
const inv = await lightning.createInvoice({ amount: 25000 });
// Stablecoin swaps: BTC \x3C-> USDC/USDT
const lendaswap = new LendaSwapSkill({ wallet });
const quote = await lendaswap.getQuoteBtcToStablecoin(100000, "usdc_pol");
ArkadeBitcoinSkill
getArkAddress()/getBoardingAddress()— get addressesgetBalance()— balance breakdown (offchain + onchain)send({ address, amount })— send sats offchaingetTransactionHistory()— transaction listonboard(params)/offboard(params)— onchain rampswaitForIncomingFunds(timeout?)— wait for incoming payment
ArkaLightningSkill
createInvoice({ amount, description? })— Lightning invoice (reverse swap)payInvoice({ bolt11 })— pay Lightning invoice (submarine swap)getFees()/getLimits()— swap fees and limitsgetPendingSwaps()/getSwapHistory()— swap tracking
LendaSwapSkill
getQuoteBtcToStablecoin(amount, token)/getQuoteStablecoinToBtc(amount, token)swapBtcToStablecoin(params)/swapStablecoinToBtc(params)getSwapStatus(swapId)/getPendingSwaps()/getSwapHistory()claimSwap(swapId)/refundSwap(swapId)getAvailablePairs()
Stablecoin Swaps (LendaSwap)
Non-custodial BTC/stablecoin atomic swaps via HTLCs.
Supported tokens: usdc_pol, usdc_eth, usdc_arb, usdt0_pol, usdt_eth, usdt_arb
Supported chains: polygon, ethereum, arbitrum
const lendaswap = new LendaSwapSkill({ wallet });
// Get quote
const quote = await lendaswap.getQuoteBtcToStablecoin(100000, "usdc_pol");
console.log("You'll receive:", quote.targetAmount, "USDC");
// Execute swap (BTC -> USDC)
const swap = await lendaswap.swapBtcToStablecoin({
targetAddress: "0x...", // EVM address
targetToken: "usdc_pol",
targetChain: "polygon",
sourceAmount: 100000,
});
console.log("Swap ID:", swap.swapId);
// Check status
const status = await lendaswap.getSwapStatus(swap.swapId);
// Claim completed swap
const claim = await lendaswap.claimSwap(swap.swapId);
Smart Contracts
Arkade supports any valid Tapscript as VTXO locking conditions, enabling programmable offchain Bitcoin.
npm install @arkade-os/sdk @scure/base
import {
RestArkProvider,
RestIndexerProvider,
SingleKey,
VtxoScript,
MultisigTapscript,
CSVMultisigTapscript,
} from "@arkade-os/sdk";
import { hex } from "@scure/base";
const arkProvider = new RestArkProvider("https://mutinynet.arkade.sh");
const indexerProvider = new RestIndexerProvider("https://mutinynet.arkade.sh");
const info = await arkProvider.getInfo();
const serverPubkey = hex.decode(info.signerPubkey).slice(1);
Available contract primitives:
- MultisigTapscript — N-of-N multisig
- CLTVMultisigTapscript — Multisig with absolute timelocks
- CSVMultisigTapscript — Multisig with relative timelocks
- VtxoScript — Combine spending paths into Taproot trees
Contract patterns in docs: HTLC/Hashlock, Escrow (3-path), Spilman channels, Dryja-Poon channels, Lightning channels, chain swaps, Oracle DLC.
Use @scure/base for encoding, NOT bitcoinjs-lib.
See: https://docs.arkadeos.com/contracts/overview
Networks & Resources
| Network | Server URL | Explorer |
|---|---|---|
| Bitcoin mainnet | https://arkade.computer |
https://arkade.space |
| Mutinynet (testnet) | https://mutinynet.arkade.sh |
https://explorer.mutinynet.arkade.sh |
| Signet | https://signet.arkade.sh |
https://explorer.signet.arkade.sh |
| Regtest (local) | http://localhost:7070 |
— |
Local development:
nigiri start --ark
This starts a Bitcoin regtest node with an Arkade operator at http://localhost:7070.
Key Concepts
- VTXOs: Virtual Transaction Outputs — self-custodial offchain Bitcoin coins. States: preconfirmed, settled, recoverable, spent.
- Batch Swaps: How VTXOs achieve Bitcoin finality — multiple transactions batched into a single onchain settlement.
- Preconfirmation: Instant confirmation cosigned by the operator, before onchain settlement.
- Virtual Mempool: DAG-based offchain execution engine that processes Arkade transactions.
- Unilateral Exit: Users can always withdraw their funds onchain without operator cooperation.
- Ark Addresses:
ark1...(mainnet) /tark1...(testnet) — bech32m-encoded addresses containing server + user keys.
Documentation
- Full docs: https://docs.arkadeos.com
- Technical primer: https://docs.arkadeos.com/primer
- Wallet SDK v0.3: https://docs.arkadeos.com/wallets/v0.3/setup
- Smart contracts: https://docs.arkadeos.com/contracts/overview
- Lightning swaps: https://docs.arkadeos.com/contracts/lightning-swaps
- LLM-friendly index: https://docs.arkadeos.com/llms.txt
- GitHub: https://github.com/arkade-os/skill
- Make sure OpenClaw is installed (local or Docker)
- Run the install command in chat:
/install bitcoin-arkade - After installation, invoke the skill by name or use
/bitcoin-arkade - Provide required inputs per the skill's parameter spec and get structured output
What is Build apps with Bitcoin and Stablecoins on Arkade?
Guide for developing with the Arkade TypeScript SDK (@arkade-os/sdk) — Bitcoin wallets, Lightning, smart contracts, and stablecoin swaps. It is an AI Agent Skill for Claude Code / OpenClaw, with 356 downloads so far.
How do I install Build apps with Bitcoin and Stablecoins on Arkade?
Run "/install bitcoin-arkade" in the OpenClaw or Claude Code chat to install it in one step — no extra setup required.
Is Build apps with Bitcoin and Stablecoins on Arkade free?
Yes, Build apps with Bitcoin and Stablecoins on Arkade is completely free (open-source). You can download, install and use it at no cost.
Which platforms does Build apps with Bitcoin and Stablecoins on Arkade support?
Build apps with Bitcoin and Stablecoins on Arkade is cross-platform and runs anywhere OpenClaw / Claude Code is available (cross-platform).
Who created Build apps with Bitcoin and Stablecoins on Arkade?
It is built and maintained by tiero (@tiero); the current version is v0.2.1.